top of page

Automotive Coatings

Have questions? Fill out our support form for assistance.

Email us: automotive@cleanarmor.com

Clean Armor® Automotive ECO products are available through distributor: Empire Co. LLC. 


Clean Armor® Composite products are available through BluCure and Ka&B Services LLC.


Clean Armor® Metal & Universal products are available through Abbot Paint & Varnish, BluCure, and
Ka&B Services LLC.

Product Available Size:
1 Quart (.95L)

Larger sizes are available if needed

Filler Paste is available in .25 lb size

Automotive ECO1688

Automotive ECO1688

Automotive Clear Coat

A UVA curable polymer clear coat for use as a rapid repair surfacer or clear coat top coat for metal and flexible automotive plastics and synthetic substrates.

Product Details
Automotive ECO1888-I

Automotive ECO1888-I

DTMP Surfacer / Texture Coat

A UVA curable polymer clear coat, primer surfacer and texture coating for use as a rapid repair surfacer or clear coat top coat for metal and flexible automotive plastics and synthetic substrates.

Product Details
Automotive ECO288

Automotive ECO288

Filler Paste

A UV Curable Filler Paste that is used for deep surfacing defects and repair of composite tool face surfaces and composite parts.

Product Details

Featured at SEMA

A UV curable Multipanel Clear. For use as an intercoat clear for auto paint and graphics products. To be used on RM and Glasurit base coats. Superior anti-sag on vertical applications at up to 2 mil per application. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and high build capacity. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Automotive CAT-9

Intercoat Clear

UV intercoat clear designed to seal graphics and artwork. Designed for most solvent-based and waterborne paints and graphics.

Product Details
A UV Curable Composite Filler Paste that is used for deep surfacing defects and repair of composite tool face surfaces and composite parts.

Composite 7037

Filler Paste

A UV Curable Filler Paste for voids, cracks, chips, or gouges. For use on wood, metal, and synthetic substrates. Excellent for clear coat chip repair.

Product Details
A UV Curable Light Viscosity Laminating Resin that is used for the construction of composite parts. For use with fiberglass, carbon fiber, kevlar, wood, metal, plastics. For structural and non-structural parts. VOC free, cure on demand, can be applied in extreme humidity or temperatures. Excellent wetting, adhesion, and intercoat build characteristics. Can be infused.

Composite 7050 LV

Light Viscosity Laminating Resin

Light viscosity. For structural repairs and new builds. An eco-friendly epoxy or polyester replacement that is 100% solids, VOC-free, and cure-on-demand. Immediate full curing ensures that parts remain unchanged in shape after the initial cure.

Product Details
A UV Curable Direct To Metal Primer. For use as a primer for metal and synthetic substrates. Clear product can be tinted. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and can be used as a general high-build primer. Can be applied to previously finished and fully cured automotive coating systems. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is. Available Finishes: Clear - Gray - Buff

Metal 910 DTM

DTM Primer

A UV curable DTM primer for metal and plastic. Can be tinted.

Product Details
A UV Curable Adhesion Promoter. For use as a bonding coat for metal and plastic to be applied wet on wet as an adhesion promoter with the sealer or primer. Is used for improved adhesion and anti-corrosion protection on steel, aluminum, and plastic. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is. For use on aluminum, hot rolled steel, treated metal, copper, and brass. Designed for use with Clean Armor products.

Universal 200

Adhesion Promoter

A UV Curable Adhesion Promoter. For use as a bonding coat for metal and plastic to be applied wet on wet as an adhesion promoter with the sealer or primer.

Product Details
A UV Curable Primer. Can be tinted. For use as a primer for metal and plastic. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and is compatible with most waterborne and solvent base coats. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is. Available Finishes: Gray, White or Clear

Universal 210

Primer - Gray, White or Clear

A UV Curable Primer. Can be tinted. For use as a primer for metal and plastic.

Product Details
A UV curable polymer top coat. UV clear designed for use in the transportation industry to be applied to vinyl wrap, synthetic and automotive plastics, and graphics material. Excellent adhesion performance and weathering. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is. Available Finishes: Gloss - Satin - Matte

Universal 227

Top Coat

UV clear designed for use in the transportation industry to be applied to vinyl wrap and graphics material. Excellent adhesion performance and weathering.

Product Details
A UV curable polymer top coat. For use on interior and exterior wood, metal, and plastic surfaces. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion and is compatible with most waterborne and solvent base coats. Can be applied to previously finished and fully cured substrates. Product is not color verified for automotive solvent based coats. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Universal 230

Top Coat

A UV curable finish with excellent adhesion. Can be applied to previously finished and fully cured substrates. Product is not color verified for automotive solvent based paints.

Product Details
A UV curable Multipanel Clear. For use as a top coat on interior and exterior wood, metal, and plastic surfaces. Superior anti-sag on vertical applications at a 1 mil application. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion. Can be applied to previously finished and fully cured substrates. Product is not color verified for automotive solvent based coats. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is.

Universal 232

Multipanel Clear

A UV curable top coat for interior and exterior wood, metal, and plastic surfaces. Superior anti-sag on vertical applications.

Product Details
A UV curable polymer clear coat. Is color verified on modern water base and solvent base color systems. For use as a clear coat on modern water based and solvent based color systems. Upon exposure to UV light, the coating cures tack-free within 4 minutes or less. The cured coating has excellent adhesion. Can be applied to previously finished and fully cured substrates. The formulation is 100% solids containing zero solvents or HAPs (100% VOC free). The product exhibits no off-gassing, resulting in low to no shrink (superior wetting). The product does not require a catalyst or reducer and is ready to use as is. Available in Gloss, Satin, and Matte

Universal 235

Base Clear Coat

A UV curable clear finish that is color verified on modern water based and solvent based color systems.

Product Details
Visit the entire Clean Armor Team in Booth 44251 at SEMA 2026 (Las Vegas, NV) November 3-6
bottom of page